Photographic Narrative

 Performers: Joanna Cichocka & Adrian Ziebinski
 Photography (except the yellow scene): Adrian Ziebinski
 Lights: Aneta Cichocka
 Story (non-biographical) : Patrycja Cichocka

 More photos of Adrian Ziebinski:
Making Of
Final Pro

PORTFOLIO

Ever since my childhood, I have been fascinated with horror films and speciall effects which make them so appealing. I adore the horribly beautiful and truly inspirational works of artists such as Tom Savini, Rick Baker, and Bob Keen. For some reason this theme has followed me throughout my adult life, and in consequence led to the full time study of Technical Effects for Performance. Taking a maximum advantage of the course, I'm trying now to make my way, step by step, into the world of special effects and prosthetics for the film industry.                    
To view my professional portfolio of work go to:
http://www.wix.com/merkova/portfolio

...........................................................

The Prop

The prop is a 13 weeks old human fetus. Before sculpting I gathered photo references to learn about the size, proportions, and colours. Having the measurements, I made a wire armature and sculpted the fetus is shavant. The fetus was sculpted with its arms spread, as later it is going to be attached to the crucifix.
On the pictures below is final sculpt during the preparation for moulding in fibre glass (the sculpt is 'walled' with clay, sprayed over with J-Wax, and brushed lightly with talcum powder).

Two-part fibre glass mould of human fetus: finished and ready for casting.

 

I applied a couple of layers of a pale flesh-tone latex on to my mould. In meantime I bent two pieces of cotton covered wire (to fit the arms and the legs) and sank them in to the latex. I used the wire in order to stiffen the very thin arms and legs. Because the J-foam (which will be used to fill up the inside of my prop) may not spread beyond the elbows and knees, I fill these parts with latex and small pieces of sponge-foam.

When the latex is dry, I apply another thin layer on to the parts which will bond together after the mould is closed. After closing the mould and screwing tightly together, I leave it for a couple of hours to let the latex dry. And because there are bleeding holes in my mould, I know latex will dry properly instead of 'sweating'.

Finally I pour J-foam inside the mould and leave it to cure. I'm using J-foam 162,  mixing ratio 2:1 by weight to produce a fairly soft foam (to make sure that the cast can be removed from the mould easily).

                                                                

When removed from the mould, the prop can be now trimmed along the seam line. To do this I use a pair of surgical curved scissors and microscissors.

Because this prop is for a life performance, I need to make two crucifixes: one on its own for the early scenes and one with the fatus attachel for the later scene. When the crosses are ready, the prop is painted with Skin Illustrator and attached to one of them.

Finished piece:

Male Character: COSTUME

Making process of the male costume is very similar to the process of making the male mask: soaked sheep leather is moulded directly on the plaster life cast (in this case torso). I make the costume in relation to mask, and for that reason the mask needs to be present durig the process.

When the piece is dry, it is time for fittings and adjustments. As much as I can do working with the life casts of my models, I still need to work with the person to make sure that the costumes fit and models are comfortable and able to move.

Once the piece is ready, I'm making a paper patterns for a 'tattoo-sleeve', which are later cut out from leather and fixed together using Evo Stik. It is important to do the final fitting before bonding the leather.

Below finished (painted and 'aged') top piece with sleeve attached.

Trousers are the bottom part of the male costume. I have decided to buy a leather/suede trousers (cheaply from a second hand shop) and alter them to match the rest of the costume and the character in general.
For that I'm using a talcum powder (fade & rub off effect) and pure latex (shine and 'aged' effect).

Finished piece

Male Character: MASK

Just like for the female character's costume, I took a life cast of the male character - full head and torso.

Starting with the mask, I moulded the leather on top of the head cast. I didn't sculpt the shapes prior like I did with the female mask. I'm still using the sheep leather, and to fix the shapes and creases I simply dried them with the hair dryer. Then I worked out the pattern for the fastening straps.

Once the straps are measured and cut, I fix them with small belt buckles. For this I need to use a hole puncher and a 3mm double head rivet. It is very important to choose the right size puncher and rivets: if the hole is too large the rivet will come out - especially from a stretchy leather just like the one I'm using. The rivets should be chosen not only for their head size, but also for the lenght of the stem which should match the thickness of the leather pieces that will be fixed together.

To make the straps look neat, and matching the rest of the mask, i soaked the edges with water and roll them up and back. Sometimes, if the leather is thick, it is good to trim the edges with a surgical blade and then shaped. When dried, the rolled up edges can be glued for a permanent fix.

 

Completed male mask below

                                                                     

 

 

When ready, the mask needs to be painted and the leather 'aged'. I tested the Fiebing's Leather Dye in advance, so now I have some thinned dye which I'm going to apply little by little to add various shades and dimension. Although the dye and thinner are alcohol based, it has to be remembered that their first apearance on the leather surface is darker because of the moist. Once the alcohol evaporates (and that is within minutes) the colour will become lighter and ready for the next application if required. It is best to work with lighter colour and keep adding it gradually than use stronger one, as it will be impossible to remove it. To apply facial stubble (in character) I use an irregular piece of reticulated foam and pure unthinned dye. To 'age ' the leather I use various tools and materials: metal dish scrubber (for a harsh treatment) and a ball of tiul (for a milder treatment) to rub off previously dyed leather, and a hair wax to add some shine and 'age'. I found  the hair wax very useful because it is nicely absorbed by the leather without leaving a grease-film on the surface, and it can be applied repeatedly if neaded gradually darkening the leather. The wax must be applied AFTER the colouring, otherwise it will prevent the dye from sinking into the leather.

  

Finished mask on the performer

and during the light tests